Above: Aft Seating with space underneath for 2 x 6-man life
rafts and access to the rear windlass and anchor chain. |
Above: looking down on the aft dive platform, stern anchor
roller and the backstay chain plate. Also stern boarding ladder and
folding dive ladder. |
Above: Aft seating. This sits on the 2 lazarette covers
and each half will lift independently on a hydraulic strut. The lids
will then rotate out over the stern to allow access to the lazarettes. |
Spraying the high gloss varnish on the Saloon table top -
upside down to reduce dust in the finish.
|
The Saloon table, as it will be stored against the keel
case when not in use. |
The Saloon table finished. The Camphor Burr veneered
top has been left in high gloss varnish, while the oak table frame has Satin
finish. |
| |
|
|
 |
 |
 |
| Above: Pre-paint inspection of
the aluminium mast at Formula Spar, Holland. |
Above: Jason of Formula Spar stood next to our 78 foot mast. |
Above: Our 21 foot boom,
already painted Oyster White. |
 |
Left:
Teak cockpit seating in progress.
Right: Andy checking the proto-type stern rope reel
before production of 2 stern versions and 2 deck mounted versions.
Below
Left: Finished starboard seating.
Below Right: Port cockpit seating. |
 |
 |
 |
 |
Left:
Closer inspection of the glazed doghouse, showing the companionway roller
door. Right: Mock-ups of companionway
roller door and doghouse instrument panel. |
 |
| |
 |
|
 |
Above: Looking down the deck to the glazed doghouse.
Left: Doghouse instrument panel mock-up and
aluminium item in production.
Right: Doghouse instrument panel complete and
painted.
|
 |
|
 |
Left: Galley
units ready for final finish Right:
Galley sink unit with formica worktop. Andy has done all the
formica worktops in the boat... yet another skill learned. |
 |
 |
Left: Putting the
name on the transom. Right: And the
varnishing continues... |
 |
